EQUINOX2 HSX
The EQUINOX2 HSX range of single-phase hybrid solar inverters makes maximum use of energy generated for self-consumption.
On the one hand, like the On-Grid models of the EQUINOX2 S/SX/T series, high-energy efficiency continues to be an important factor for EQUINOX2 HSX. However, the extreme versatility is an even more crucial factor.
The EQUINOX2 HSX devices have up to 6 operating modes. Peak Shaving mode, surplus energy graded management: load/batteries/grid, time-slot discrimination mode, automatic backup mode, isolated mode and operating mode without batteries.
In back-up mode, the system functions as an uninterruptible power supply (UPS), capable of supplying 100% of the inverter's nominal power to loads with an automatic transfer time of less than 10 ms in the event of a mains power failure. Our residential battery system (5-20 kWh) allows for scalable growth depending on the required autonomy time and loads. Thanks to its high modularity, capacities of up to 60 kWh can be achieved with a single inverter, which is particularly useful in installations that are isolated from the mains supply.
All EQUINOX HSX range equipment includes 24-hour monitoring, web portal access and the free EQUINOX smartphone and tablet app.
Domestic self-consumption up to 8kW with high sustainability
Whenever, whether in a domestic or small business environment, you want to ensure a high degree of independence from the grid or when consumption is concentrated in times outside those of maximum radiation, and the income from the sale of energy to the grid does not sufficiently compensate the expenditure item for energy from the conventional grid. As BATERIAS RESIDENCIAIS (5 kWh - 20 kWh) perfectly completes the hybrid solution.
One of the 6 operating modes of the EQUINOX2 HSX is Peak Shaving. When we activate this inverter mode, we see that whenever the solar radiation is insufficient to satisfy a particular demand or the user has decided to limit grid consumption to a level less than the specific load demand, it will activate the batteries and complete the necessary power using the energy previously stored in the batteries. Thus, there is no need to consume additional energy from the grid and, therefore, there is no additional cost. Obviously, this will only happen if the power demanded is not greater than that of the inverter.
The low start-up voltage is a characteristic common to all the EQUINOX2 series. In other words, the solar radiation necessary for our system to start generating energy is minimal, only 80Vdc being required.
If the EQUINOX2 HSX hybrid inverters are also surprisingly under the threshold from which the batteries start to charge; the amortisation of the investment is ensured even under unfavourable conditions, whether by energy storage or direct consumption.
The EQUINOX2 HSX series is compatible with several battery models available on the market, although the RESIDENTIAL BATTERIES (5-20 kWh) batteries complement it in the best way, with scalable modular configuration, maximum adaptation to the desired autonomy and in line with the investment capacity of the user.
- Positive photovoltaic input terminals
- Negative photovoltaic input terminals
- Main communication port (communication module connection).
- Auxiliary communication port (optional).
- AC / mains terminal.
- DC disconnector.
- Output connection for critical loads.
- Connection port for current metering.
- Communication port with batteries.
- Positive battery connection terminal.
- Negative battery connection terminal.
MONTAWEB.com