SPS ADVANCE RT2
SPS ADVANCE RT2
Line-interactive sine-wave tower/rack UPS 800 VA to 3000 VA
Effective protection for entry-level servers and IT equipment
Salicru's SPS ADVANCE RT2 series is a range of UPS featuring line-interactive technology with sine-wave output voltage and convertible tower/rack format, the height being only 2U for all power ratings. In addition, its output power factor of 0.9 and compatibility with APFC (active power factor correction) type loads make it the best option for any type of load that requires protection.
In terms of communications, it features an RS-232/USB interface (compatible with HID protocol) and a smart slot that can optionally hold an SNMP card, MODBUS or potential-free contacts; also available are software packages for local or virtual monitoring and management of protected devices.
And other outstanding features include: solutions for applications with long backup (by means of equipment with extra chargers and additional battery modules), swivel mount display and adapters (pedestal and lugs) for placing in tower or rack formats and programmable outputs (critical/non-critical loads) to extend the available backup.
The power range for the SPS ADVANCE RT2 series is: 800, 1,100, 1,500, 2,000 and 3,000 VA.
Characteristics
Applications
Flexibility and versatility in the protection of IT environments
The features of the SPS ADVANCE RT2 series make it a versatile solution for protecting a wide range of IT equipment such as basic servers, routers, switches, hubs and point-of-sale with high power density requirements and/or rack installation of servers/ communications.
Performances
Line-interactive technology
Permanent AVR stabilisation
Output power factor PF=0.9
Rack mounting height of 2 U
Convertible tower/rack format
Swivel-mount control panel
RS232 and USB-HID communication interfaces
Smart slot for SNMP and relays
Management software
Pure sine wave output
Backup battery for mains interruptions
Rack rails included
Line-interactive technology
Ideal for office environments. It combines Off-line technology with an internal voltage stabiliser for better compensation of the voltage fluctuations and to avoid a greater use of the batteries and so prolong their life time.
Sine-wave output voltage
This UPS system offers clean, high-quality output voltage with a pure sine wave. This feature is particularly suitable for use with sensitive loads and guarantees optimum operation for the devices connected.
Tower/rack convertible format
The unit can be mounted in tower format (with a pedestal) or rack format (using ears).
Communications
- USB interface with HID protocol: Parameter configuration, UPS control and computer shutdown/hibernation through the USB port. Available for Windows, Linux and Mac.
- UPS management and monitoring software for closing files/applications for Windows, Linux, Unix and Mac. Free and downloadable from www.salicru.com.
- Smart slot for the connection of SNMP environment integration cards and signal cards via potential-free contacts or Modbus protocol.
Optional extended back-up time
For processes that require longer autonomy, this UPS allows more back-up time by additional battery modules.
Display
- Configuration values, fault codes and remaining backup.
- Level of battery available.
- Level of load connected.
- Input values (current, voltage and frequency).
- Output and battery values (current, voltage and frequency).
- Operating mode.
Connections
- Connection for battery module (only in models with extra charger).
- ADSL/fax/modem transient protector.
- Emergency stop (EPO).
- USB interface.
- Socket IEC C19 (only for 3000 VA model).
- Resettable thermal cutoff (fuse for 800 and 1100 VA models).
- Plug (IEC C14 for 800, 1100 and 1500 VA models; IEC C20 for 2000 and 3000 VA models).
- Fan.
- RS-232 interface.
- Smart slot for SNMP/potential-free contacts/ MODBUS.
- Sockets (8 x IEC C13), programmable critical (x4) / non-critical (x4).
Models
Showing 1 - 10 of 10 products
SPS 800 ADV RT2 B1
Power (VA):
800
No. Of sockets:
8
Type:
UPS with extra charger without batteries
SPS 1100 ADV RT2 B1
Power (VA):
1100
No. Of sockets:
8
Type:
UPS with extra charger without batteries
SPS 1500 ADV RT2 B1
Power (VA):
1500
No. Of sockets:
8
Type:
UPS with extra charger without batteries
SPS 2000 ADV RT2 B1
Power (VA):
2000
No. Of sockets:
8
Type:
UPS with extra charger without batteries
SPS 3000 ADV RT2 B1
Power (VA):
3000
No. Of sockets:
8 + 1
Type:
UPS with extra charger without batteries
Showing 1 - 10 of 10 products
Request information about SPS ADVANCE RT2
MONTAWEB.com