EQUINOX2 S/SX

The solar energy received by the photovoltaic panels depends on several factors, such as latitude, orientation, inclination, irradiation, shadows, temperature, etc. As a consequence, it is necessary at every moment to identify the point on the V-I curve of the photovoltaic generator at which the inverter is operating, in order to operate at the maximum power, and this is achieved using the integrated MPPT (Maximum Power Point Tracker) control.

This requires that the MPPT control has a wide voltage range, since this allows the system to operate at lower levels of irradiation and to generate more energy during each day.

All network inverters in the EQUINOX2 range come with a zero injection system as standard, eliminating the need for additional devices. This system can be activated or deactivated according to the needs of each installation. This feature enables the output power to be regulated at all times, allowing or blocking the injection of energy into the grid without the need to purchase additional devices.

This makes EQUINOX2 inverters highly adaptable to a wide variety of grid configurations and systems of different capacities. However, it is important to note that this functionality does not permit the use of the self-consumption without surplus mode set out in RD 244/2019. For this, the SLC ENERGY MANAGER device is necessary.

The new Equinox2 S/SX series is one of the most efficient on the market, which, when added to the wide voltage range, provides exceptional system performance levels.

All inverters in the EQUINOX2 range come with a built-in meter capable of recording both the energy generated and consumed during solar production hours. This feature reduces costs in simple installations or those intended for energy sales, where comprehensive monitoring is not essential.