SLC-6000-TWIN PRO3 B1
SLC-6000-TWIN PRO3 B1
6000 VA Uninterruptible Power Systems (UPS) IoT On-line double conversion (0’) and DSP control with FP=1
Robustness, energy efficiency and extended connectivity: the best combination to protect your productive environment
Power (VA):
6000
Type:
UPS with extra charger without batteries
Code: 6B5AB000006
EAN: 8436584873266
Specifications
Technical specifications
TECHNOLOGY
On-line double-conversion
FORMAT
Tower
INPUT
Rated voltage
220/230/240 V
Voltage range
110 ÷ 276 V(1)
Rated frequency
50 / 60 Hz (auto-detection)
Frequency range
50 ±5 Hz/60 ±6 Hz
Total harmonic distortion (THDi)
<3 % linear load / <5 % non-linear load
Power factor
≥0,99
OUTPUT
Power factor
1
Rated voltage
220/230/240 V
Voltage accuracy (battery mode)
±1%
Total harmonic distortion (THDv)
< 1% linear load / < 5% non-linear load
Synchronised frequency
50 ±5 Hz/60 ±6 Hz
On-line performance
95%
Eco-mode performance
98 %
Admissible overloads in battery mode
105 ÷ 125 % for 1 min/125 ÷150 % for 30 s/>150 % for 500 ms
Admissible overloads in bypass mode
105 ÷ 125 % for 30 s/>150 % for 5 min/>150 % for 500 ms
Admissible overloads in-line mode
105 ÷ 125 % for 10 min/125 ÷150 % for 30 s/>150 % for 500 ms
Parallel
Yes, up to 3 units
BATTERY
Protection
Against overvoltages, undervoltages and overheating
Battery type
Not included, Pb-Ca sealed, AGM, maintenance-free
Charge type
Smart charge with 3 modes
Recharge time
3 hours to 90%
Maximum no. of EBMs
6
CHARGER
Temperature voltage compensation
Yes
Charging current
Adjustable 0 ÷ 4 A (0 ÷ 12 A for B1 devices)
COMMUNICATION
Ports
USB-HID/RS-232/RJ-45/HDMI for dongle wifi
Intelligent slot
For SNMP/AS400/Modbus
Monitoring software
Software for Windows, Linux and Mac/app for iOS and Android/web portal
OTHER FUNCTIONS
Cold start (start-up from batteries)
Yes
Emergency stop (EPO)
Yes
OPERATING MODES
Eco-mode
Yes
Frequency converter (CVCF)
Yes(2), operates with or without batteries
GENERAL
Operating temperature
0º C ÷ +50º C(3)
Relative humidity
Up to 95%, non-condensing
Maxium operating altitude
2,400 masl (power degradation up to 5,000 m)(4)
Acoustic noise at 1 metre
<55 dB ÷ <60 dB at full load/<50 dB ÷ <55 dB at 75% load
STANDARDS
Safety
EN IEC 62040-1
Electromagnetic compatibility (EMC)
EN 62040-2 (C3)
Operation
VFI-SS-11 (EN 62040-3)
Corporate cerification
ISO 9001, ISO 14001, ISO 45001
DIMENSIONS
Depth (mm)
492
Width (mm)
225
Height (mm)
348
WEIGHT
Weight (kg)
13.4
(1) 110 ÷ 160 V with linear derating of load at 50%.
(2) Power derating of 60% in frequency converter mode.
(3) Power derating of 50% from 40°C to 50°C.
(4) Power derating of 1% for each additional 100°m over 1000 MASL.
Video
3D
Purchase online
Select Region and Country/Province to view Online Sales Channels
Accessories
Communications
AS-400 GX5 CON_R_AUX4
Relay interface for configuring inputs/outputs and switching contacts as required, up to 4 inputs/outputs.
Code: 663AA002213
EAN: 8436035929450
CS141 SENSOR CABLE
SNMP Card adapter cable for temperature and humidity sensor.
Code: 663AA002270
EAN: 8436584876298
MODEM GSM4G SMS BOX CS141-6 GX
GSM modem with an additional safety measure whereby coordinators and responsible technicians receive an SMS immediately if a fault occurs in the UPS system.
Code: 663AA002264
EAN: 8436584875406
NIMBUS AS400 Card
Nimbus AS400 card with potential-free contacts.
Code: 663AA002222
EAN: 8436584870869
NIMBUS ROUTER 4G
Device that uses 4G mobile networks to provide Internet connection via WiFi or Ethernet.
Code: 663AA002241
EAN: 8436584876281
NIMBUS2 Mini SNMP Card
Nimbus2 Ethernet / SNMP web adapter. Mini card format. Connection to the Salicru cloud (IoT - MQTT). Modbus TCP and RS232 protocol. SNMP V2. Shutdown of servers, by means of RCCMD software.
Code: 663AA002286
EAN: 8436584872856
SENSORMANAGER II CS141/CS121
Control unit allowing the connection of analogue and digital sensors for strategic room monitoring. 8 analogue inputs, 4 digital inputs and 4 digital outputs.
Code: 663AA002220
EAN: 8436584876267
SNMP Card GX5S CS141MINI-6
Ethernet adapter / SNMP web adapter. Mini card format. Modbus TCP and RS232 protocol. SNMP V2 and V3. Shutdown of servers, via RCCMD software.
Code: 663AA002252
EAN: 8436584873853
Software RCCMD
Application that allows the simultaneous and safe shutdown of different servers remotely. Communication via SNMP.
Code: 663AA002119
EAN: 8436584875246
SOFTWARE UNMS II-150
Network management system that can actively manage monitored UPS and external components and execute automatic actions. Up to 150 licenses.
Code: 663AA002141
EAN: 8436584876236
SOFTWARE UNMS II-200
Network management system that can actively manage monitored UPS and external components and execute automatic actions. Up to 200 licences.
Code: 663AA002261
EAN: 8436584874577
SOFTWARE UNMS II-25
Network management system that can actively manage monitored UPS and external components and execute automatic actions. Up to 25 licenses.
Code: 663AA002139
EAN: 8436584870388
SOFTWARE UNMS II-50
Network management system that can actively manage monitored UPS and external components and execute automatic actions. Up to 50 licenses.
Code: 663AA002140
EAN: 8436584876229
SOFTWARE UNMS II-9
Network management system that can actively manage monitored UPS and external components and execute automatic actions. Up to 9 licenses.
Code: 663AA002138
EAN: 8436035923212
Software UPSMAN
Application that allows simultaneous and safe shutdown of computers that are directly connected to the UPS via USB or serial network port.
Code: 663AA002123
EAN: 8436584876212
SOFTWARE WINPOWER
Winpower is a powerful UPS monitoring software, which provides an easy-to-use graphical interface to monitor and control the UPS. Downloadable via web.
Code: 663AA999999
T GX Sensor
Temperature sensor (range -25º C to +100º C). Compatible SNMP Card adapter required.
Code: 663AA002129
EAN: 8436035923953
T+H GX Sensor
Temperature sensor (range -25º C to +100º C) and relative humidity (range 0% to 100%). SNMP compatible SNMP Card adapter required
Code: 663AA002128
EAN: 8436035923946
Generic
BM-R 63 A+
The BM-R series maintenance By-pass by Salicru in rack/wall format with 63 A includes, as its most notable features, manual switching from UPS to mains and vice versa, simple operation via selector switch, and allows the loads to operate during maintenance or UPS replacement.
Code: 6B4OP000002
Measurements (mm): 440x85x80
EAN: 8436584873709
Weight: 2.4
BM-TWIN PRO3-P-6-2/2
External Manual Bypass for SLC TWIN PRO3 6 kVA series equipment allows maintenance to be carried out without interrupting the power supply to the protected equipment.
Code: 6B5OQ000005
EAN: 8436584876625
CAB. UPS MOD. BAT. TWIN PRO3
Interconnection cable between the SLC TWIN PRO3 4-10 kVA series UPS and the external battery module.
Code: 018DK000007
CABLE SALIDA C14/1-SCHU 1m
Power supply cable, 1 m long, with schuko female inlet / IEC C14 socket outlet
Code: 663BA000014
CABLE SALIDA C14/1-SCHU 2m
2 m long output cable, with IEC C14 inlet / schuko socket outlet
Code: 663BA000008
EAN: 8436035921997
IEC C14/4-Schuko 2m Output Power Strip
2 m outlet strip, 2 m long, with IEC C14 inlet / IEC C14 outlet / 4 Schuko sockets multiple socket outlets
Code: 663BA000004
EAN: 8436035922000
IEC C14/6-Schuko 2m Output Power Strip
2 m outlet strip, 2 m long, with IEC C14 inlet / multiple socket outlet, 6 schuko sockets
Code: 663BA000005
EAN: 8436035923441
IEC C14/C13 1.8mts
Output cable, 1.8 m long, with IEC C14 inlet / IEC C19 output
Code: 663BA000001
EAN: 8436035921973
IEC C20/4-Schuko 2m Output Power Strip
2 m long power strip, with IEC C20 inlet / multiple socket outlet, 4 x schuko sockets
Code: 663BA000006
EAN: 8436035923687
IEC C20/6-Schuko 2m Output Power Strip
2 m long power strip, with IEC C20 inlet / multiple socket outlet, 6 x schuko sockets
Code: 663BA000007
EAN: 8436035923694
IEC C20/C19 1.8mts
1.8 m output cable, 1.8 m long, with IEC C20 inlet / IEC C19 outlet
Code: 663BA000002
EAN: 8436035921980
KIT PARALELO TWIN PRO3/RT3 4-10KVA
Parallel Kit including management card, connection cables between equipments and secure fastening system of the connectors (One unit per UPS is required)
Code: 6B5OP000003
EAN: 8436584873846
Terminal cover TWIN PRO3 4-10KVA
The cable gland kit is used to fasten the Ø12.5~18 mm input cable and the Ø12.5~18 mm output cable.
Code: 6B5OP000002
EAN: 8436584876632
Autonomy
Autonomy curves
SLC-6000-TWIN PRO3 and SLC-6000-TWIN PRO3 B1
|
|
SLC-6000-TWIN PRO3
|
|
|
SLC-6000-TWIN PRO3 B1 + 1 x 6B5BU000001
|
|
|
SLC-6000-TWIN PRO3 + 1 x 6B5BU000002
|
|
|
SLC-6000-TWIN PRO3 B1 + 2 x 6B5BU000002
|
|
|
SLC-6000-TWIN PRO3 B1 + 2 x 6B5BU000001
|
|
|
SLC-6000-TWIN PRO3 + 2 x 6B5BU000002
|
|
|
SLC-6000-TWIN PRO3 B1 + 3 x 6B5BU000002
|
|
|
SLC-6000-TWIN PRO3 B1 + 3 x 6B5BU000001
|
Downloads
Documents
Data sheet
Catalogues
General Catalogue
Manuals
Nimbus connectivity manual ETHERNET/SNMP/NIMBUS CLOUD NETWORK CARDS / AS400
Certificates & Declarations
Declaration of conformity - UK SLC TWIN PRO3 4-10 kVA
Instructions
Software
Request information about SLC-6000-TWIN PRO3 B1
MONTAWEB.comWelcome to Salicru. Select country/language
Australia English
Bangladesh English
Camboya English
China English
India English
Indonesia English
Japan English
Kazakhstan English
Laos English
Malaysia English
Myanmar English
New Zealand English
Pakistan English
Philippines English
Singapore English
South Korea English
Sri Lanka English
Taiwan English
Thailand English
Vietnam English
extralarge
large
tablet
mobile
We use proprietary and third-party cookies to keep track of how our website is used and to be able to improve it,
adapt the content to your tastes and personalise our advertising, marketing and social media posts.
Click on the corresponding buttons to accept all of them, reject them or configure your settings.
Please see our Cookie Policy for more information.
We’ve detected that you're accessing from United States. Would you like to see the website for your country?