CV30-370-4F PV
Specifications
Technical specifications
PHOTOVOLTAIC INPUT
Recommended DC input
300 ÷ 750 V
Recommended MPPT voltage
550 V
Maximum DC voltage
800 V
Starting voltage
300 V (80 V with booster)
Minimum DC voltage
250 V (70 V with booster)
MAINS INPUT
Voltage
Three-phase 380 V (-15%) ÷ 440 V (+10%)(1)
Frequency
50/60 Hz Permitted range: 47 ÷ 63 Hz
OUTPUT
Rated voltage
Three-phase, 0 ÷ 100% of the input voltage.
Admissible overloads
150% for 1 min; 180% for 10 s; 200% for 1s
Maximum distance
100 m sine-wave filter.
INPUT SIGNALS
Digital
5 PNP/NPN inputs, polarity, virtual activation and configurable on/off delay.
OUTPUT SIGNALS
Relay
2 multifunction NO/NC switching outputs Maximum 3 A / 250 Vac, 1 A / 30 Vdc
Analogue
2 selectable outputs 0 ÷ 10 V / 0 ÷ 20 mA
Digital
Drives ≤ 2.2 kW: Not available / Drives ≥ 4 kW: 1 multifunction open collector output (50 mA / 30V)
Communication port
Drives ≤ 2.2 kW: 1 RS-485 Modbus RTU port + 1 RS-422 port / Drives ≥ 4 kW: 1 RS-485 Modbus RTU port
OPERATION
Keypad
Included
SPECIFIC PROTECTIONS
Faults
Overvoltage, undervoltage, overcurrent, reverse polarity connection, communication failure with the booster module, broken hydraulic sensor.
Alarms
Weak light, underload, full tank.
FILTERING
EMC filter
Drives ≤ 2.2 kW: Category C3 with easy connection as option / Drives ≥ 4 kW: Category C3 integrated
GENERAL
Ambient temperature
- 10 ~ 50°C (1% derating per degree exceeding 40°C).
Degree of protection
IP20
STANDARDS
Safety
EN 61800-5-1
Electromagnetic compatibility (EMC)
EN 61800-3 C3
Corporate cerification
ISO 9001, ISO 14001, ISO 45001
DIMENSIONS
Depth (mm)
202
Width (mm)
250
Height (mm)
400
WEIGHT
Weight (kg)
17
(1) Can work at 3 x 220~240 Vac through configuration, with derating of the nominal power
Video
View distributor
Select Region and Country/Province to view Distributors
Accessories
Generic
ATS MOD-1100-4-PV
Automatic switching module to switch between solar panel power and mains power or genset power, for CV30-PV frequency inverters
Code: 6B1NK000002
Measurements (mm): 90x231x116
EAN: 8436035923632
Weight: 1.31
IPF-L-940-4
Three-phase line choke input filter 400 Vac, for frequency inverters CV30 and CV50 series.
Code: 6B1ME000011
EAN: 8436035926732
KIT FRAME-CV10/30 BZ214 1.8m
Cabinet door mounting frame + 1.8 metre cable, for frequency inverters CV10 / CV30 series
Code: 6B1NB000001
Measurements (mm): 67x87x40
EAN: 8436035926916
KLED-CV10/30
LED console - 5 digits, for frequency inverters series CV10 / CV30 / CV30-PV
Code: 6B1NA000001
Measurements (mm): 56x75x31
EAN: 8436035926879
KLED-CV30-C
LED Copy Console - 5-digit, for frequency inverters CV30 series
Code: 6B1NA000002
Measurements (mm): 56x75x31
EAN: 8436035926886
OPF-FER-48
Ferrite output filter (common mode filters) to reduce voltage peaks, preventing premature ageing of motor windings and bearings.
Code: 6B1MD000003
Measurements (mm): 150x51x110
EAN: 8436035926619
OPF-SW-750-4
Sine wave LC filter 400 Vac, with pure sine voltage output, for frequency inverters series CV30 and CV50
Code: 6B1MF000011
Measurements (mm): 360x355x230
EAN: 8436035926855
Weight: 46
Downloads
Documents
Data sheet
Catalogues
Manuals
Certificates & Declarations
Instructions
Request information about CV30-370-4F PV
MONTAWEB.comWelcome to Salicru. Select country/language
Argentina Español
Bolivia Español
Brazil Português
Caribbean Islands English
Chile Español
Colombia Español
Costa Rica Español
Cuba Español
Dominican Republic Español
Ecuador Español
El Salvador Español
Guatemala Español
Mexico Español
Nicaragua Español
Panama Español
Paraguay Español
Peru Español
United States English
Uruguay Español
Venezuela Español
extralarge
large
tablet
mobile
We use proprietary and third-party cookies to keep track of how our website is used and to be able to improve it,
adapt the content to your tastes and personalise our advertising, marketing and social media posts.
Click on the corresponding buttons to accept all of them, reject them or configure your settings.
Please see our Cookie Policy for more information.