News
Designed for industrial use, the system offers 10 minutes of backup at full load. Its architecture is based on easily replaceable standard 50 kW power modules and cabinets housing lithium batteries, which take up much less space and have a higher temperature tolerance than standard batteries.
Salicru has manufactured a 1.5 MW Uninterruptible Power Supply (UPS) designed to protect against all forms of power outages and, in this case, particularly the micro-cuts that commonly occur at the factory’s location. The installation responds to the need to ensure continuity throughout the entire plant.
The solution uses standard 50 kW power modules to limit the impact of any intervention on a single module to 50 kW, thereby simplifying replacement and maintenance. The hot-swap modules can even be replaced while the equipment is operating.
Fully modular design for straightforward maintenance
Some products on the market offer parallel architectures, in which multiple interconnected monolithic units are grouped together to form a high-power system. This configuration facilitates physical integration, but each unit retains its own distinct components, such as the charger, static bypass and control system.
While this approach is suitable for some installations, it’s important to bear in mind that during maintenance or in the event of a fault, the amount of available power is reduced in larger blocks, and it may also take longer to coordinate the units’ response to sudden changes in load or frequency. Furthermore, their size and weight, coupled with their non-standard design, can complicate replacement work and make spare parts harder to find.
The SLC ADAPT2 has a modular design based on lower-capacity power modules, ranging from 10 to 50 kW depending on the module type. Its architecture allows maintenance to be conducted solely on the affected module, which can be easily removed and replaced while the system continues to run. As a result, the maintenance process is significantly simplified, and because only the affected module needs to be replaced, managing spare parts is a straightforward task.
Lithium batteries tailored to the installation
Space for the batteries was limited. To address this, Salicru proposed using lithium batteries instead of traditional lead-calcium batteries, designed for UPS applications. The chosen configuration provides around 10 minutes of autonomy at 1.5 MW—more than double the initial target—along with a much lower total cost of ownership, a significantly longer discharge cycle and greater tolerance to higher temperatures.
The solution also offers the benefit of a sleep mode function. When sufficient power is available, the system can adjust the modules’ operation to the load and conserve reserve capacity, combining redundancy with operational efficiency.









MONTAWEB.com