Home > Products > Professional > UPS 3x400/230V > SLC ADAPT
  • ADAPT15_10x30K_LNB5548-2
  • ADAPT30_6X30_LNB_1104
  • ADAPT_50K_LNB_1267
  • ADAPT15_MOD30_LPB6059
Data Sheet es ca en fr de pt
Product Catalogue es en fr
Manual SLC ADAPT 180, 300 and 500 kVA es en
By pass box manual es en
Safety instructions es en fr de pt
General Catalogue es ca en fr de pt


Modular On-line double conversion UPS 30-1500 kVA

Flexibility, availability and reliability in superior electrical protection

Salicru’s SLC ADAPT series consists of modular On-line double conversion uninterruptible power supply (UPS) solutions with DSP control and three-level IGBT inverter technology.


Flexibility: It enables solutions to be configured from 10 kVA to 1500 kVA, thanks to the range of modules available (30 and 50 kVA), different configurable systems (6 or 10 modules) and the parallel/redundant option of up to three 500 kVA systems. It also provides increased protection as needs grow - pay as you grow - thereby improving total cost of ownership (TCO).


Availability: Its hot-swap modules can be added or replaced during operation, thereby improving mean time to repair (MTTR) and reducing maintenance costs. In addition, the system’s remote management, which can be integrated into any platform, also facilitates operation. And the extensive back-up options available, along with intelligent battery charging, ensure continuous operation of the protected critical loads.


Reliability: Its DSP control, based on three-level PWM technology, improves response effectiveness and, along with shared load redundancy, significantly extends the mean time between failures (MTBF). Moreover, both the control display and the bypass module can be replaced without affecting the operation of the device.

View distributor Request information


Data centres with all capacities, IT infrastructures, modular and virtualised data centres and applications for critical processes are some of the services that require high-level electrical protection to ensure reliable, continuous and high-quality operation, such as that provided by Salicru’s SLC ADAPT series systems.

Applications SLC ADAPT - SALICRU


  • On-line double conversion technology with modular architecture.
  • 30 and 50 kVA modules with DSP control and three-level PWM technology.
  • 6 or 10-module systems (up to 500 kVA per system).
  • Possibility of parallel/redundant operation up to 1500 kVA.
  • Hot-pluggable and swappable plug & play modules.
  • Input power factor >0.99.
  • Input current distortion (THDi) <3%.
  • Three-phase input / output voltages. 
  • Output power factor = 0.9.
  • Control and management by means of LCD display, LEDs and keypad.
  • Efficiency in On-line mode >96%. (1)
  • 99% performance in Eco-mode operation.
  • RS-232, RS-485, relays and USB communication channels.
  • Smart slots for extended relays and SNMP.
  • Smart-efficiency mode to optimize system performance. 
  • Improved return on investment (ROI).
  • Compact design to save space in server rooms.
  • SLC Greenergy solution.

(1) In systems 50 kVA modules.


  1. Manual bypass.
  2. Battery start-up.
  3. LCD display.
  4. Bypass module.
  5. Dry contacts.
  6. Extended relays and SNMP slot.
  7. RS-232, RS-485 and USB interfaces.
  8. Power modules.


  • Extended relays and SNMP adapter. 
  • Extended back-up times.
  • Kit for parallel systems.
  • Frequency converter operation.


Display consisting of operation keys, status LEDs and touch screen detailing all functions, measurements and alarms.


Technical Support and Service

  • Pre-sales and after-sales advice.
  • Start-up. (1)
  • Technical support by telephone.
  • Preventive/corrective services.
  • Maintenance contracts. (1)
  • Training courses.

(1) Ask for local conditions           

Techinical Specifications

Techinical Specifications


Range SLC Adapt


RCCMD Software


UPS managing and monitoring in a heterogeneous IT networks, where different platforms coexist, becomes almos impossible, because the less common operating systems on the market do not have that such software.The RCCMD is an application that allows the simultaneous and secure shutdown of the 95% of existing platforms. Like the most comprehensive monitoring software, the RCCMD can send messages or commands to different clients of the network.

UNMS II Software


For those networks which have more than one UPS to feed it and it requires a concentration monitoring from a single command post, UNMS II software (UPS Network Managament System) is the ideal solution. UNMS II allows managing multiple installations of all those units that have an Ethernet adapter SNMP / Web Adapter and / or sensors. UNMS II packages are available in 9, 25, 50 or 150 licenses.

Ethernet/SNMP Web Adapter

Ethernet/SNMP Web Adapter - SALICRU

SNMP adapter to integrate the equipment in a IT network by using an IP address. It includes adapter, CD with programming software, configuration cable, MIB (Management Information Base) and user manual. Available in card or box formats.



Monitoring, managing and alarm system for lead-acid batteries. Ensures the full operation of the battery system, preventing unexpected or unnoticed failures caused by defective batteries. System Components: WebManager, battery modules, associated bus

Temperature and humudity sensor

Temperature and humudity sensor - SALICRU

Probe to measure the magnitude of the battery ambient temperature and humidity of the equipment

Battery modules

Battery modules

For backup requirements greater than standard, one or several battery modules connected to the UPS can be installed.

Cable for parallel installations

Cable for parallel installations - SALICRU

Communications cable for simple or redundant parallel installations.

Frequency converter function

Frequency converter function - SALICRU

To convert the input frequency from 50Hz to 60Hz or vice versa. Batteries can be installed in case they are required.

Remote control

Remote control

Remote panel shows the status of the UPS, in real time, by means of a touch screen, through the RS485 communication port.

External manual bypass

External manual bypass - SALICRU

External Manual Bypass to make maintenance tasks, by isolating the equipment electrically. Bypass type make Before break

Autotranformer for other voltages

Autotranformer for other voltages - SALICRU

It used to adapt the equipment to other different nominal voltages 3x380 / 400/415 + N V.

Isolation transformer

Isolation transformer - SALICRU

Electrical device that provides galvanic isolation between input and output, and adjust tension.

Separate bypass line

Separate bypass line

 For facilities with dual power supply, enabling the separation of inverter and bypass line power supplies.

Input/output voltage configurations

Input/output voltage configurations

Consult us for possible single/single-phase, three/single-phase and single/three-phase input/output configurations.

  • SLC6/30-ADAPT 180
    180000 VA
  • SLC10/30-ADAPT 300
    300000 VA
  • SLC10/50-ADAPT 500
    500000 VA