With today’s modern street lighting systems, it’s not enough to reduce the voltage to supply the lamps to obtain energy savings. The criteria are different nowadays and the requirements have increased in accordance with the growth of street lighting. Applying the most advanced technology possible is needed as well as telemanagement, monitoring and parameterisation of the complete block of units in order to guarantee the sustainability of the lighting system.
The ILUEST+CR series of advanced lighting flow dimmer-stabilisers from SALICRU, takes over from its highly successful and field-tested predecessor, has vast improvements in critical aspects of modularity, power density, protection and telemanagement. As a result, greater flexibility in areas of power growth, maintenance, commissioning and equipment integration can be better realized along with superior reliability and shorter payback periods.
The ILUEST+CR series is available in a wide range of powers, has 3 implementation variants - indoor, outdoor and OEM Kit - and several possibilities of monitoring. Used in conjunction with our powerful telemanagement SICRES technology, the ILUEST+CR is now the state-of-the-art reference in lighting regulation and control.
PERFORMANCES
* Bi-directional ‘Buck’ converter with IGBTs, electronic, static and transformerless. * Continuous regulation of the output voltage, no voltage steps; higher lamp lifetime. * Lineal and programming ramps. * High response time. * Stabilisation better than ± 1% + saving voltage periods = savings > 40%. * LCD display, as standard. * Protections with automatic programming rearm due to overload and overtemperature. * Protections with fuses and against lightning arrestors. * Automatic bypass per phase, independent operating, manual operating, active by default and break before make. * RS-232 port + MODBUS protocol, as standard. * SICRES telemanagement card built in completely. * Duty cycle adapted to the warm up curve of the lamp. * Programming of two saving levels and start voltage via LCD display. * Average payback of the i nvestment between 6 and 24 months. * Low weight and dimensions, higher power density. * No harmonic injection to mains. * SLC Greenergy solution.
