The DC energy systems from FAC P series of SALICRU are rectifiers specially designed to supply direct current to the most varied equipment of medium and high power. Manufactured in power rates of 1000, 2000, 2700 and 5000 W, allow being connected in parallel and built in 19” cabinets, where each cabinet can also include a monitoring and management unit (MS-102), batteries and DC outgoing distribution, as well as load priority systems. Besides, each rectifier module can be hot swapped for its connection and removing, with all the advantages that it means in the system operating.
On the other hand, thanks to the high quantity of rectifier modules that can be connected to one system only, allow having power rates higher than 170 kW.

The monitoring and management unit (MS-102) controls the complete system, also it stores and manages the input, output and battery data; and allows setting all the parameters on it. The rectifier modules communicates with it through the RS-485 port, and permanently it is controlling the output voltage, current sharing among the modules, battery charging current, critical and non-critical load contactors, the end of autonomies, etc. The external communication can be done in local or remote modes (GSM / TCP-IP).

The DC energy systems from FAC P series of SALICRU provide a power supply of high level to the always critical telecommunication systems, guaranteeing its perfect operating without any unexpected break. Besides, thanks to its modular nature, the system can be upgraded according to your needs, by optimising the investment.

Performances:

* Able for single or three phase inputs.
* High power density.
* Easy installation and maintenance.
* Low operating and maintenance cost.
* High MTBF
* High efficiency.
* Battery charging current limit.
* Unit power factor.
* Plug-in modules (hot swapping).
* Monitoring and management unit (MS-102).